| Issue Date | Title | Author(s) | Type | Мp-cat. |
| 2014 | Dependence of interfacial heat transfer coefficient on casting surface temperature during solidification of Al–Si alloy castings cast in CO2 sand mold | Kovačević, Lazar   ; Terek, Pal ; Miletić, Aleksandar ; Kakaš, Damir | Article | |
| 2014 | Effect of Diamond Paste Finishing on Surface Topography and Roughness of Dental Nanohybrid Composites – AFM Analysis | Lainović, Tijana ; Blažić, Larisa ; Kukuruzović, Dragan ; Vilotić, Marko ; Ivanišević, Aljoša; Kakaš, Damir | Conference Paper | |
| 2016 | Effects of die core treatments and surface finishes on the sticking and galling tendency of Al–Si alloy casting during ejection | Terek, Pal ; Kovačević, Lazar ; Miletić, Aleksandar ; Panjan, Peter; Baloš, Sebastian ; Škorić, Branko ; Kakaš, Damir | Article | |
| 2013 | Friction and wear of low temperature deposited TiN coating sliding in dry conditions at various speeds | Damir Kakaš ; Terek, Pal ; Miletić, Aleksandar ; Kovačević, Lazar ; Vilotić, Marko ; Škorić, Branko ; Dragomir Krumes | Article | |
| 2009 | Influence of Load and Sliding Speed on Friction Coefficient of IBAD Deposited TiN | Kakas, D. ; Skoric, B.; Mitrovic, Slobodan ; Babic, Miroslav; Terek, P.; Miletic, A.; Vilotic, M. | Article | |
| 1998 | Influence of plasma nitriding on mechanical and tribological properties of steel with subsequent PVD surface treatments | Skoric, B; Kakas, D ; Gredic, T | Article | |
| 2011 | Influence of Sliding Speed and Surface Roughness on the Friction Coefficient and Wear of TiN Coatings Deposited at Low Temperature | Kakas, D. ; Škoric, B.; Terek, P.; Kovačević L.; Miletic, A.; Vilotic, M.; Mitrovic, Slobodan ; Babic M. | Conference Paper | |
| 2013 | Influence of substrate roughness on adhesion of TiN coatings | Miletić, Aleksandar ; Terek, Pal ; Kovačević, Lazar ; Vilotić, Marko ; Kakaš, Damir ; Škorić, Branko ; Kukuruzović, Dragan | Article | |
| 2015 | Intenzivna plastična deformacija u procesima višefaznog sabijanja materijala | Vilotić, Marko | Doctoral theses | |
| 2015 | Istraživanje savremenih tehnologija za kontinualno livenje bronze | Arsenović, Milan | Doctoral theses | |
| 2010 | Karakterizacija površina mikro i nano prevlaka | Škorić, Branko ; Damir Kakaš | Monograph | |
| 2004 | Microstructural studies of TiN coatings prepared by PVD and MAD | Skoric, B; Kakas, D ; Bibić, Nataša M.; Rakita, M | Article | |
| 2015 | Primena metoda inverznog inženjerstva u cilju pronalaženja graničnih uslova pri livenju u peščanim kalupima | Kovačević, Lazar | Doctoral theses | |
| 2015 | Razvoj nanoslojnih i nanokompozitnih metal-nitridnih prevlaka | Miletić, Aleksandar | Doctoral theses | |
| 2004 | Structure, hardness and adhesion of thin coatings deposited by PVD, TBAD on nitrided steels | Skoric, B; Kakas, D ; Rakita, M; Bibić, Nataša M.; Peruskob, D | Article | |
| 2009 | Surface Roughness and Friction Coefficient in IBAD Deposited Tin Hard Coating | Kakaš, Damir ; Skoric, Branko ; Babic, Miroslav; Mitrovic, Slobodan ; Miletic, Aleksandar; Vilotic, Marko ; Terek, Pal ; Kovačević L. | Article | |
| 2015 | Surface roughness and morphology of dental nanocomposites polished by four different procedures evaluated by a multifractal approach | Ţălu, Ştefan; Stach, Sebastian; Lainović, Tijana ; Vilotić, Marko ; Blažić, Larisa ; Alb, Sandu Florin; Kakaš, Damir | Article | |
| 2016 | Unapređenje kvaliteta alata za livenje pod pritiskom primenom tehnologija inženjerstva površina | Terek, Pal | Doctoral theses | |
| 2015 | Uticaj mikrostrukture na prelaznu temperaturu ADI materijala | Rajnović, Dragan | Doctoral theses | |