Researchers
Prica, Miljana
| Issue Date | Title | Author(s) | Type | Мp-cat. |
|---|---|---|---|---|
| 2023 | Sorption potential of microplastics for azo- and phthalocyanine printing dyes![]() | Tubić, Aleksandra | Article | 21M21 |
| 2023 | Optimization of Tensile Strength in the Paper Material Cutting Process Based on CO2 Laser Process Parameters![]() | Pinćjer, Ivan | Article | 21M21 |
| 2023 | A Complete Guide to Extraction Methods of Microplastics from Complex Environmental Matrices![]() | Rani, Monika; Ducoli, Serena; Depero, Laura Eleonora; Prica, Miljana | Article | 21M21 |
| 2022 | The Modelling of Surface Roughness after the Ball Burnishing Process with a High‐Stiffness Tool by Using Regression Analysis, Artificial Neural Networks, and Support Vector Regression![]() | Kanovic Z. | Article | 21M21 |
| 2020 | The influence of aging on surface free energy of corona treated packaging films![]() | Zolek-Tryznowska, Zuzanna; Prica, Miljana | Article | 21M21 |
| 2019 | Measurement of copper deposition by electrocoagulation/flotation from waste printing developer![]() | Adamović, Savka | Article | 21M21 |
| 2018 | Application of hexagonal two dimensional electrokinetic system on the nickel contaminated sediment and modelling the transport behavior of nickel during electrokinetic treatment![]() | Krčmar, Dejan | Article | 21M21 |
| 2018 | A comparative study of the decolorization capacity of the solar-assisted Fenton process using ferrioxalate and Al,Fe-bentonite catalysts in a parabolic trough reactor![]() | Pucar, Milidrag Gordana | Article | 21M21 |
| 2016 | Feasibility of electrocoagulation/flotation treatment of waste offset printing developer based on the response surface analysis![]() | Adamović, Savka | Article | 21M21 |
| 2015 | The electrocoagulation/flotation study: The removal of heavy metals from the waste fountain solution![]() | Prica, Miljana | Article | 21M21 |
| 2014 | Three different clay-supported nanoscale zero-valent iron materials for industrial azo dye degradation: A comparative study![]() | Kerkez, Đurđa | Article | 21M21 |
| 2014 | Degradation of Anthraquinone Dye Reactive Blue 4 in Pyrite Ash Catalyzed Fenton Reaction![]() | Bečelić Tomin, Milena | Article | 21M21 |
| 2013 | Use of fly ash for remediation of metals polluted sediment –Green remediation | Tomašević Pilipović, Dragana | Article | 21M21 |
| 2012 | Influence of pH and ozone dose on the content and structure of haloacetic acid precursors in groundwater | Molnar Jazić, Jelena | Article | 21M21 |
| 2011 | Characterisation, Availability, and Risk Assessment of the Metals in Sediment after Aging | Velimirović, Milica B. | Article | 21M21 |
| 2011 | Quantifying the environmental impact of As and Cr in stabilized/solidified materials | Dalmacija, Milena; Prica, Miljana | Article | 21M21 |
| 2010 | Correlation between the results of sequential extraction and effectiveness of immobilization treatment of lead- and cadmium-contaminated sediment | Dalmacija, Milena B.; Prica, Miljana | Article | 21M21 |
| 2010 | Changes in metal availability during sediment oxidation and the correlation with the immobilization potential | Prica, Miljana | Article | 21M21 |
| 2008 | A comparison of sediment quality results with acid volatile sulfide (AVS) and simultaneously extracted metals (SEM) ratio in Vojvodina (Serbia) sediments | Prica Miljana | Article | 21M21 |
